Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Selecting clinical and laboratory methods of manufacture of orthopaedic titanium alloy structures using a biopotentiometer
|
01.01.2018 |
Yumashev A.
Utyuzh A.
Mikhailova M.
Samusenkov V.
Volchkova I.
|
Current Science |
|
0 |
Ссылка
©. 2018, Current Science Association, Bengaluru. All Rights Reserved. The present communication aims at determining an optimum method of manufacture of orthopaedic arch titanium alloy dentures that would not cause galvanosis in patients using such dentures. A clinical randomized controlled retrospective study was conducted. Sixty patients who used arch titanium alloy dentures were examined. Three measurements of electrochemical potentials in various areas of the oral cavity were done in all patients, using a biopotentiometer. Linear prediction of differences in potentials in measurement areas 1-3 for the control group (CG) of patients exhibited minor growth dynamics, which can be indicative of the risk of galvanosis in CG patients in the future.
Читать
тезис
|
Comparative clinical and laboratory study of the force loss generated by NiTi closed coil springs
|
01.01.2018 |
Shaddud A.
Kosyreva T.
|
Stomatologiia |
|
0 |
Ссылка
The purpose in this study was to compare the force decay of laboratory and clinical NiTi closed coil springs. Specimens were 30 NiTi coil springs (clinical) and 15 (laboratory in artificial saliva 36.6 ºC) springs were tested by dynamometer to evaluate force loos at different intervals: 1, 2 and 3 months of use. Data (gF) were analyzed statistically using. Clinical and laboratory data were compared to evaluate effect of the oral environment on force loss. It was observed a significant force loss of NiTi springs. NiTi springs showed force loss (13.2%) at 28 days of clinical use, with a further significant loss from 4-12 weeks (~21%); force levels remained steady thereafter. Were not statistically different in clinical and laboratory force loss data. Space was closed at an average rate of 1 mm/month.
Читать
тезис
|
Effects of various prophylactic procedures on titanium surfaces and biofilm formation
|
01.01.2018 |
Di Salle A.
Spagnuolo G.
Conte R.
Procino A.
Peluso G.
Rengo C.
|
Journal of Periodontal and Implant Science |
|
4 |
Ссылка
© 2018. Korean Academy of Periodontology. Purpose: The aim of this study was to evaluate the effects of various prophylactic treatments of titanium implants on bacterial biofilm formation, correlating surface modifications with the biofilms produced by Pseudomonas aeruginosa PAO1, Staphylococcus aureus, and bacteria isolated from saliva. Methods: Pure titanium disks were treated with various prophylactic procedures, and atomic force microscopy (AFM) was used to determine the degree to which surface roughness was modified. To evaluate antibiofilm activity, we used P. aeruginosa PAO1, S. aureus, and saliva-isolated Streptococcus spp., Bacteroides fragilis, and Staphylococcus epidermidis. Results: AFM showed that the surface roughness increased after using the air-polishing device and ultrasonic scaler, while a significant reduction was observed after using a curette or polishing with Detartrine ZTM (DZ) abrasive paste. In addition, we only observed a significant (P < 0.01) reduction in biofilm formation on the DZ-treated implant surfaces. Conclusion: In this study, both AFM and antibiofilm analyses indicated that using DZ abrasive paste could be considered as the prophylactic procedure of choice for managing peri-implant lesions and for therapy-resistant cases of periodontitis.
Читать
тезис
|