Factors influencing the drug release from calcium phosphate cements
|
01.01.2022 |
Fosca M.
Rau J.V.
Uskoković V.
|
Bioactive Materials |
10.1016/j.bioactmat.2021.05.032 |
0 |
Ссылка
Thanks to their biocompatibility, biodegradability, injectability and self-setting properties, calcium phosphate cements (CPCs) have been the most economical and effective biomaterials of choice for use as bone void fillers. They have also been extensively used as drug delivery carriers owing to their ability to provide for a steady release of various organic molecules aiding the regeneration of defective bone, including primarily antibiotics and growth factors. This review provides a systematic compilation of studies that reported on the controlled release of drugs from CPCs in the last 25 years. The chemical, compositional and microstructural characteristics of these systems through which the control of the release rates and mechanisms could be achieved have been discussed. In doing so, the effects of (i) the chemistry of the matrix, (ii) porosity, (iii) additives, (iv) drug types, (v) drug concentrations, (vi) drug loading methods and (vii) release media have been distinguished and discussed individually. Kinetic specificities of in vivo release of drugs from CPCs have been reviewed, too. Understanding the kinetic and mechanistic correlations between the CPC properties and the drug release is a prerequisite for the design of bone void fillers with drug release profiles precisely tailored to the application area and the clinical picture. The goal of this review has been to shed light on these fundamental correlations.
Читать
тезис
|
Factors influencing the drug release from calcium phosphate cements
|
01.01.2022 |
Fosca M.
Rau J.V.
Uskoković V.
|
Bioactive Materials |
10.1016/j.bioactmat.2021.05.032 |
0 |
Ссылка
Thanks to their biocompatibility, biodegradability, injectability and self-setting properties, calcium phosphate cements (CPCs) have been the most economical and effective biomaterials of choice for use as bone void fillers. They have also been extensively used as drug delivery carriers owing to their ability to provide for a steady release of various organic molecules aiding the regeneration of defective bone, including primarily antibiotics and growth factors. This review provides a systematic compilation of studies that reported on the controlled release of drugs from CPCs in the last 25 years. The chemical, compositional and microstructural characteristics of these systems through which the control of the release rates and mechanisms could be achieved have been discussed. In doing so, the effects of (i) the chemistry of the matrix, (ii) porosity, (iii) additives, (iv) drug types, (v) drug concentrations, (vi) drug loading methods and (vii) release media have been distinguished and discussed individually. Kinetic specificities of in vivo release of drugs from CPCs have been reviewed, too. Understanding the kinetic and mechanistic correlations between the CPC properties and the drug release is a prerequisite for the design of bone void fillers with drug release profiles precisely tailored to the application area and the clinical picture. The goal of this review has been to shed light on these fundamental correlations.
Читать
тезис
|
Tricalcium phosphate cement supplemented with boron nitride nanotubes with enhanced biological properties
|
01.09.2020 |
Rau J.V.
Fosca M.
Fadeeva I.V.
Kalay S.
Culha M.
Raucci M.G.
Fasolino I.
Ambrosio L.
Antoniac I.V.
Uskoković V.
|
Materials Science and Engineering C |
10.1016/j.msec.2020.111044 |
0 |
Ссылка
© 2020 Elsevier B.V. A self-setting bone cement containing β-tricalcium phosphate (TCP) supplemented with boron nitride nanotubes (BNNTs, 1 wt%) was synthesized and analyzed in situ for its kinetics of hardening and selected physicochemical and biological properties. Moderately delayed due to the presence of BNNTs, the hardening reaction involved the transformation of the TCP precursor to the dicalcium phosphate (DCPD) product. In spite of the short-lived chemical transformations in the cement upon its hardening, the structural changes in it were extended. As a result, the compressive strength increased from day 1 to day 7 of the hardening reaction and the presence of BNNTs further increased it by ~25%. Fitting of the time-resolved energy-dispersive diffractometric data to the Johnson-Mehl-Avrami-Kolmogorov crystallization kinetics model conformed to the one-dimensional nucleation at a variable rate during the growth of elongated DCPD crystals from round TCP grains. For the first seven days of growth of human mesenchymal stem cells (hMSCs) on the cement, no difference in their proliferation was observed compared to the control. However, between the 7th and the 21st day, the cell proliferation decreased compared to the control because of the ongoing stem cell differentiation toward the osteoblast phenotype. This differentiation was accompanied by the higher expression of alkaline phosphatase, an early marker of hMSC differentiation into a pre-osteoblast phenotype. The TCP cement supplemented with BNNTs was able to thwart the production of reactive oxygen species (ROS) in hMSCs treated with H2O2/Fe2+ and bring the ROS levels down to the concentrations detected in the control cells, indicating the good capability of the material to protect the cells against the ROS-associated damage. Simultaneously, the cement increased the expression of mediators of inflammation in a co-culture of osteoblasts and macrophages, thus attesting to the direct reciprocity between the degrees of inflammation and stimulated new bone production.
Читать
тезис
|
Influence of oblique angle deposition on Cu-substituted hydroxyapatite nano-roughness and morphology
|
25.07.2020 |
Prosolov K.A.
Khimich M.A.
Rau J.V.
Lychagin D.V.
Sharkeev Y.P.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2020.125883 |
0 |
Ссылка
© 2020 Elsevier B.V. In this work, we study the effect of RF magnetron oblique angle deposition (OAD) on morphology, structure, and elemental composition of as-deposited and heat-treated Cu containing calcium phosphates. The control over the surface morphology and nano roughness provided by OAD is of great interest as both Mesenchymal Stem Cells and various types of bacteria respond strongly to nanoscale topography. A Cu substituted hydroxyapatite target was used to deposit coatings on the surface of titanium (Ti) and silicon (Si) substrates. The samples were placed at an oblique angle of 80° relative to the surface of the sample holder and in a normal configuration with respect to the flux direction and, therefore, parallel to the target. The dense homogeneous coatings with globular surface features deposited at normal flux incidence (NFI) configuration changed to elliptical, highly oriented structures with the direction dictated by the atomic shadowing effect when the substrate was deposited at an oblique angle. As-deposited thin films were subjected to post-deposition-heat-treatment at 700 °C in an Ar atmosphere. This led to a drastic change in the surface morphology and, namely, lost the directionality of the nanostructures. According to the X-ray diffraction data, the samples deposited obliquely showed preferential growth in the (002) plane and lower internal stress, than samples coated at NFI for both the Si and Ti substrates. The RMS roughness of the films deposited obliquely on Si was twice that of the films deposited at NFI (860 ± 80 pm and 408 ± 60 pm, respectively). However, it was not the case for the Ti substrate, the RMS roughness decreased from 42 ± 4 nm for coatings deposited at normal flux geometry to 33 ± 2 nm for coatings deposited obliquely. The heat-treatment of the samples deposited at 80° resulted in a significant increase in the surface roughness: 8 ± 0.7 nm for Si and 71 ± 4 nm for Ti substrates. The obtained results demonstrate that the oblique angle deposition can be used to fabricate nano-rough surface morphologies.
Читать
тезис
|
Influence of oblique angle deposition on Cu-substituted hydroxyapatite nano-roughness and morphology
|
25.07.2020 |
Prosolov K.A.
Khimich M.A.
Rau J.V.
Lychagin D.V.
Sharkeev Y.P.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2020.125883 |
0 |
Ссылка
© 2020 Elsevier B.V. In this work, we study the effect of RF magnetron oblique angle deposition (OAD) on morphology, structure, and elemental composition of as-deposited and heat-treated Cu containing calcium phosphates. The control over the surface morphology and nano roughness provided by OAD is of great interest as both Mesenchymal Stem Cells and various types of bacteria respond strongly to nanoscale topography. A Cu substituted hydroxyapatite target was used to deposit coatings on the surface of titanium (Ti) and silicon (Si) substrates. The samples were placed at an oblique angle of 80° relative to the surface of the sample holder and in a normal configuration with respect to the flux direction and, therefore, parallel to the target. The dense homogeneous coatings with globular surface features deposited at normal flux incidence (NFI) configuration changed to elliptical, highly oriented structures with the direction dictated by the atomic shadowing effect when the substrate was deposited at an oblique angle. As-deposited thin films were subjected to post-deposition-heat-treatment at 700 °C in an Ar atmosphere. This led to a drastic change in the surface morphology and, namely, lost the directionality of the nanostructures. According to the X-ray diffraction data, the samples deposited obliquely showed preferential growth in the (002) plane and lower internal stress, than samples coated at NFI for both the Si and Ti substrates. The RMS roughness of the films deposited obliquely on Si was twice that of the films deposited at NFI (860 ± 80 pm and 408 ± 60 pm, respectively). However, it was not the case for the Ti substrate, the RMS roughness decreased from 42 ± 4 nm for coatings deposited at normal flux geometry to 33 ± 2 nm for coatings deposited obliquely. The heat-treatment of the samples deposited at 80° resulted in a significant increase in the surface roughness: 8 ± 0.7 nm for Si and 71 ± 4 nm for Ti substrates. The obtained results demonstrate that the oblique angle deposition can be used to fabricate nano-rough surface morphologies.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|
Octacalcium phosphate coating for 3D printed cranioplastic porous titanium implants
|
15.02.2020 |
Smirnov I.
Deev R.
Bozo I.
Fedotov A.
Gurin A.
Mamonov V.
Kravchuk A.
Popov V.
Egorov A.
Komlev V.
|
Surface and Coatings Technology |
10.1016/j.surfcoat.2019.125192 |
0 |
Ссылка
© 2019 Elsevier B.V. In the present study, porous three-dimensional (3D) printed titanium (Ti) implants of complex shape and predefined architecture were produced by selective laser sintering (SLS) technique. Electrochemical deposition combined with biomimetic approach was applied to low-temperature coating of these implants with metastable octacalcium phosphate (OCP) achieved via chemical transformation of dicalcium phosphate dehydrate (DCPD). X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and compressive strength analyses were applied to study the chemical composition, morphology and mechanical properties of the final OCP coating on the titanium surface. In vivo comparative study of the porous 3D printed Ti and OCP coated Ti implants has been performed using critical-size crania model, porous 3D printed Ti and coated implants were compared. A statistically significant difference in the newly formed bone thickness for OCP coated Ti implants was detected already at 6 weeks after implantation. Our results provide an experimental proof of a new concept of OCP coating for cranioplasty clinical applications.
Читать
тезис
|