Репозиторий Университета

© 2020 Elsevier Inc. Objective: Conflicting data exist on the effect of dexmedetomidine on delirium. For the present study, a randomized trial was performed to investigate the effect of perioperative dexmedetomidine on the rate of postoperative delirium after cardiac surgery. Design: A randomized controlled trial. Setting: University hospital. Participants: Patients (n = 169) undergoing elective cardiac surgery (coronary artery bypass graft surgery, valve surgery, or combined surgery) with cardiopulmonary bypass. Interventions: Patients received a sevoflurane-based general anesthesia and were randomly assigned 1:1 to receive a dexmedetomidine infusion that started in the operating room (0.7 μg/kg/h) and continued into the intensive care unit (0.4 μg/kg/h) or an equivolume infusion of placebo. Measurements and Main Results: A decrease in the rate of delirium in the dexmedetomidine group compared with the placebo group was demonstrated (6 of 84 [7.1%] v 16 of 85 [18.8%]; p = 0.02; odds ratio [OR] 0.33 [95% confidence interval {CI} 0.12-0.90]). Reduced intensive care unit and hospital lengths of stay also were observed (18 [18-22] hours v 22 [18-39] hours; p = 0.002 and 17 [7-20] days v 19 [8-21] days; p = 0.04, respectively). Mortality at 30 days was 2 (2.4%) in both groups. On multivariate analysis, only dexmedetomidine administration (OR 0.24 [95% CI 0.08-0.74]) and cardiopulmonary bypass time (OR 1.02 [95% CI 1.01-1.03] for increases of 1 min) were independent predictors of delirium development. Conclusions: Dexmedetomidine administered during and after general anesthesia for cardiac surgery with cardiopulmonary bypass decreased the rate of postoperative delirium and intensive care unit and hospital lengths of stay.

© 2019, Springer Nature B.V. The objective of this study was to determine the impact of polymorphism of CYP3A subfamily isoenzymes (allelic variants of CYP3A4*22 and CYP3A5*3) on the efficacy clopidogrel in patients with an acute coronary syndrome (ACS), who have undergone percutaneous coronary intervention (PCI). Platelet activity was determined on a VerifyNow P2Y12 test system in 81 patients with ACS aged 37–91 who had PCI. The activity of CYP3A4/5 was expressed as the ratio of the concentrations of cortisol and 6β-hydroxycortisol was performed by using high performance liquid chromatography. Genotyping was performed by using real-time polymerase real-time chain reaction. The frequencies for the CYP3A5 gene, rs 776746, were identified as follows: 77 (95.1%)—CC, 4 (4.9%)—CT; the allele frequencies by loci for the CYP3A4, rs rs35599367, were as follows: 78 (96.3%)—GG, 3 (3.7%)—AG. There was no statistically significant genotype-dependent difference between the presence of a minor T and G alleles and the presence of clopidogrel resistance (OR 3.53; 95% CI 0.46–26.94; p = 0.233 and p = 0.443, respectively). The average level of the metabolic relationship (6β-hydroxycortisol/cortisol) between the clopidogrel-resistant group and the normal platelet reactivity group was not statistically significantly different: 3.3 ± 2.8 versus 3.2 ± 3.2; p = 0.947. So, the activity of CYP3A4/5 was not related to platelet aggregation rates in this model. Genotyping and phenotyping CYP3A4\CYP3A5 does not predict the antiplatelet effect of clopidogrel. More extensive research is required to establish their clinical relevance.

© 2018 Walter de Gruyter GmbH, Berlin/Boston. The focus of the study is to determine the prevalence of CYP2C19 alleles, associated with the risk of changes in the pharmacological response to clopidogrel and proton pump inhibitors in patients with acute coronary syndrome (ACS) and gastric ulcer from Russian and Yakut ethnic groups. The research included 411 patients with ACS (143 Russians and 268 Yakuts) and 204 patients with histologically confirmed gastric ulcer (63 Russians and 141 Yakuts). Genotyping of 681G>A and 636G>A polymorphisms was performed by using polymerase real-time chain reaction. In both ethnic groups, Hardy-Weinberg equilibrium was followed in a distribution of alleles and genotypes in the population (p>0.05). The 681A allele frequency in the Yakut ethnic group was higher than in the Russian group: 17.53% vs. 8.39% (p=0.001). No statistically significant difference was found in the frequency of 636A in Yakuts and Russians with ACS: 3.92% vs. 3.50% (p=0.840). While comparing the frequency distribution of alleles 681A (13.49% vs. 14.54%, p=0.878) and 636A (7.94% vs. 7.80%, p=1) in patients with a gastric ulcer from Russian and Yakut ethnic groups, no significant difference was found in carrier frequency. The results of the present study may be helpful for developing guidelines for CYPC19 genotype-directed antiplatelet therapy for Yakut and Russian patients.

© 2018, Springer Science+Business Media, LLC, part of Springer Nature. An HPLC-MS/MS method for determining dabigatran in human blood serum was developed. Samples were prepared by precipitation of proteins using MeOH followed by centrifugation and dilution with deionized H2O. The developed method had a simple sample-preparation procedure, short analysis time, and wide analytical range (from 1 to 1,000 ng/mL). This method was suitable for routine bioanalytical studies, in particular, therapeutic drug monitoring.

© 2018 Vserossiiskoe Obshchestvo Kardiologov. All rights reserved. Recently, development of medicine leads to the increase of the number and complexity of surgical interventions, explaining high significance of the risk assessments for post-surgical complications and probability of fatal outcome; this requires participation of internist in patients management with correction of therapy. The article is focused on the main scores and indexes utilized in clinical practice for prediction of possible complications, incl. cardial. A detailed description provided, for every calculator, features and limitations for usage and results interpretation.

© The Author 2018. SLURP-1 is a member of three-finger toxin-like proteins. Their characteristic feature is a set of three beta strands extruding from hydrophobic core stabilized by disulfide bonds. Each betastrand carries a flexible loop, which is responsible for recognition. SLURP-1 was recently shown to act as an endogenous growth regulator of keratinocytes and tumor suppressor by reducing cell migration and invasion by antagonizing the pro-malignant effects of nicotine. This effect is achieved through allosteric interaction with α7 nicotinic acetylcholine receptors (alpha-7 nAChRs) in an antagonist-like manner. Moreover, this interaction is unaffected by several well-known agents specifically alpha-bungarotoxin. In this work, we carry out the conformational analysis of the SLURP-1 by a microsecond-long full-atom explicit solvent molecular dynamics simulations followed by clustering, to identify representative states. To achieve this timescale we employed a GPU-accelerated version of GROMACS modeling package. To avoid human bias in clustering we used a non-parametric clustering algorithm Affinity Propagation adapted for biomolecules and HPC environments. Then, we applied protein-protein molecular docking of the ten most massive clusters to α7-nAChRs in order to test if structural variability can affect binding. Docking simulations revealed the unusual binding mode of one of the minor SLURP-1 conformations.

Biofabrication holds the potential to generate constructs that more closely recapitulate the complexity and heterogeneity of tissues and organs than do currently available regenerative medicine therapies. Such constructs can be applied for tissue regeneration or as in vitro 3D models. Biofabrication is maturing and growing, and scientists with different backgrounds are joining this field, underscoring the need for unity regarding the use of terminology. We therefore believe that there is a compelling need to clarify the relationship between the different concepts, technologies, and descriptions of biofabrication that are often used interchangeably or inconsistently in the current literature. Our objective is to provide a guide to the terminology for different technologies in the field which may serve as a reference for the biofabrication community.

Biofabrication holds the potential to generate constructs that more closely recapitulate the complexity and heterogeneity of tissues and organs than do currently available regenerative medicine therapies. Such constructs can be applied for tissue regeneration or as in vitro 3D models. Biofabrication is maturing and growing, and scientists with different backgrounds are joining this field, underscoring the need for unity regarding the use of terminology. We therefore believe that there is a compelling need to clarify the relationship between the different concepts, technologies, and descriptions of biofabrication that are often used interchangeably or inconsistently in the current literature. Our objective is to provide a guide to the terminology for different technologies in the field which may serve as a reference for the biofabrication community.