Год публикации:
Все года
2018
2019
2020
Название |
Дата публикации |
Коллектив авторов |
Журнал |
DOI |
Индекс цитирования |
Ссылка на источник |
Macro- and microscopic analyses of piles formed by Platonic solids
|
21.09.2019 |
Zhao H.
An X.
Dong K.
Yang R.
Xu F.
Fu H.
Zhang H.
Yang X.
|
Chemical Engineering Science |
10.1016/j.ces.2019.05.018 |
2 |
Ссылка
© 2019 Elsevier Ltd Sandpiles are ubiquitous in nature and engineering applications but still not fully understood due to the complexity of structures and materials properties. This work presents a systematic study on the piles of Platonic solids using the discrete element method (DEM), mainly focusing on the effect of particle shape on the repose angles and bottom pressure distributions of the piles. Five Platonic particles (tetrahedron, cube, octahedron, dodecahedron, and icosahedron) were discharged to form wedge-shaped piles. It was found that the repose angle did not increase with the decrease of particle sphericity. The pile formed by the cubes had the maximum repose angle and its bottom stress dip phenomena were more significant in terms of dip width and depth than that of other particle piles. The pressure distributions at different heights of the piles were quite similar to those of the whole piles, while the shear stress distributions near the boundaries exhibited different characteristics for the cube piles. The analyses of packing structures in terms of coordination number, radial distribution function, as well as contact types inside the piles were discussed to understand the change of pressure dips. The influence of static friction on the repose angle was more significant and it enhanced the stress dip phenomenon.
Читать
тезис
|