Репозиторий Университета

Recently, zinc and its alloys have been proposed as promising candidates for biodegradable metals (BMs), owning to their preferable corrosion behavior and acceptable biocompatibility in cardiovascular, bone and gastrointestinal environments, together with Mg-based and Fe-based BMs. However, there is the desire for surface treatment for Zn-based BMs to better control their biodegradation behavior. Firstly, the implantation of some Zn-based BMs in cardiovascular environment exhibited intimal activation with mild inflammation. Secondly, for orthopedic applications, the biodegradation rates of Zn-based BMs are relatively slow, resulting in a long-term retention after fulfilling their mission. Meanwhile, excessive Zn2+ release during degradation will cause in vitro cytotoxicity and in vivo delayed osseointegration. In this review, we firstly summarized the current surface modification methods of Zn-based alloys for the industrial applications. Then we comprehensively summarized the recent progress of biomedical bulk Zn-based BMs as well as the corresponding surface modification strategies. Last but not least, the future perspectives towards the design of surface bio-functionalized coatings on Zn-based BMs for orthopedic and cardiovascular applications were also briefly proposed.

Recently, zinc and its alloys have been proposed as promising candidates for biodegradable metals (BMs), owning to their preferable corrosion behavior and acceptable biocompatibility in cardiovascular, bone and gastrointestinal environments, together with Mg-based and Fe-based BMs. However, there is the desire for surface treatment for Zn-based BMs to better control their biodegradation behavior. Firstly, the implantation of some Zn-based BMs in cardiovascular environment exhibited intimal activation with mild inflammation. Secondly, for orthopedic applications, the biodegradation rates of Zn-based BMs are relatively slow, resulting in a long-term retention after fulfilling their mission. Meanwhile, excessive Zn2+ release during degradation will cause in vitro cytotoxicity and in vivo delayed osseointegration. In this review, we firstly summarized the current surface modification methods of Zn-based alloys for the industrial applications. Then we comprehensively summarized the recent progress of biomedical bulk Zn-based BMs as well as the corresponding surface modification strategies. Last but not least, the future perspectives towards the design of surface bio-functionalized coatings on Zn-based BMs for orthopedic and cardiovascular applications were also briefly proposed.

© 2020, Springer Science+Business Media, LLC, part of Springer Nature. The objective of this study was to investigate of selenium (Se), zinc (Zn), chromium (Cr), and vanadium (V) levels in blood serum, hair, and urine of adult obese patients. A total of 199 lean and 196 obese subjects were enrolled in the study. Serum, hair, and urinary metal and metalloid analysis were performed by inductively coupled plasma mass spectrometry at NexION 300D (PerkinElmer Inc., USA). The results established that obese subjects were characterized by 47% and 30% lower serum Cr and V levels compared with controls, respectively, whereas serum Se levels exceeded control values by 9%. In contrast, hair Cr, Se, and V content in obese subjects exceeded the control values by 51%, 21%, and 50%, respectively. In turn, hair Zn levels were found to be significantly lower by 11% compared with the lean control values. In urine, the levels of V and Zn were found to be 30% and 18% higher in obese patients. Prevalence of hypertension in obese subjects was associated with a trend for impaired Se and Zn levels. In a regression model adjusted for age, gender, hypertension, atherosclerosis, and glucose intolerance, serum Cr, V, and hair Zn were inversely associated with body mass index (BMI), whereas hair Se was considered as the positive predictor. Our data allow proposing that the observed alterations may at least partially contribute to metabolic disturbances in obesity. In turn, monitoring of Se exposure in a well-nourished adult population is required to reduce its potential contribution to obesity.

© 2020, Springer Science+Business Media, LLC, part of Springer Nature. The objective of this study was to investigate of selenium (Se), zinc (Zn), chromium (Cr), and vanadium (V) levels in blood serum, hair, and urine of adult obese patients. A total of 199 lean and 196 obese subjects were enrolled in the study. Serum, hair, and urinary metal and metalloid analysis were performed by inductively coupled plasma mass spectrometry at NexION 300D (PerkinElmer Inc., USA). The results established that obese subjects were characterized by 47% and 30% lower serum Cr and V levels compared with controls, respectively, whereas serum Se levels exceeded control values by 9%. In contrast, hair Cr, Se, and V content in obese subjects exceeded the control values by 51%, 21%, and 50%, respectively. In turn, hair Zn levels were found to be significantly lower by 11% compared with the lean control values. In urine, the levels of V and Zn were found to be 30% and 18% higher in obese patients. Prevalence of hypertension in obese subjects was associated with a trend for impaired Se and Zn levels. In a regression model adjusted for age, gender, hypertension, atherosclerosis, and glucose intolerance, serum Cr, V, and hair Zn were inversely associated with body mass index (BMI), whereas hair Se was considered as the positive predictor. Our data allow proposing that the observed alterations may at least partially contribute to metabolic disturbances in obesity. In turn, monitoring of Se exposure in a well-nourished adult population is required to reduce its potential contribution to obesity.

© 2020 Elsevier GmbH Environmental factors have been severally established to play major roles in the pathogenesis of neurodevelopmental disorders including autism spectrum disorder (ASD). ASD is a neurodevelopmental disorder that is associated with symptoms that reduce the quality of life of affected individuals such as social interaction deficit, cognitive impairment, intellectual disabilities, restricted and repetitive behavioural patterns. ASD pathogenesis has been associated with environmental and genetic factors that alter physiologic processes during development. Here, we review literatures highlighting the environmental impact on neurodevelopmental disorders, and mechanisms by which environmental toxins may influence neurodevelopment. Furthermore, this review discusses reports highlighting neurotoxic metals (specifically, lead, mercury, cadmium, nickel and manganese) as environmental risk factors in the aetiology of ASD. This work, thus suggests that improving the environment could be vital in the management of ASD.

© 2020 Background: Miramistin is a widely used antiseptic, disinfectant and preservative, and one of the most popular antimicrobial agents on pharmaceutical market of the Russian Federation (http://www.dsm.ru/en/news/385/). However, there is a lack of reported systematic data on antibacterial efficacy of this agent obtained in accordance with the international standards. Aim: This paper represents a systematic study of antibacterial properties of miramistin. Another objective of this work is to evaluate and compare the exploratory performance of in vitro and in vivo protocols of antiseptics’ efficacy testing using miramistin as the reference antiseptic. Methods: Antibacterial activity of 0.1% and 0.2% aqueous solutions of miramistin against two museum strains of S. aureus (ATCC 209p) and E. coli (CDC F-50) was studied. Three standard in vitro laboratory tests (microdilution test, suspension test, and metal surface test), and one in vivo test (on rat's skin) were used. The study was conducted in accordance with the international regulatory documents. Results: Miramistin showed high bactericidal activity against the studied bacterial pathogens in the standard in vitro tests. Thus, in the microdilution test it showed expressed activity against S. aureus (MIC 8 μg/ml, MBC 16 μg/ml) and E. coli (MIC 32 μg/ml, MBC 128 μg/ml). In the suspension test, miramistin decreased the amount of colony forming units by at least 6 log10 units for S. aureus, and by at least 4.5 log10 units for E. coli. Transition to the metal surface test led to significant decrease of antibacterial activity by 1–3 log10 units as compared to the suspension test. Further dramatic reduction of antiseptic activity (by 3–4 log10 units) was observed in in vivo rat skin test. Addition of a protein contaminant (bovine serum albumin) led to a general decrease in the effectiveness of miramistin against the test pathogens (typically, by 1–2 log10 units). An interesting effect of exposure time-dependent reversal of miramistin's specificity to the studied Gram-positive S. aureus and the Gram-negative E. coli organisms was observed in the metal surface test. Conclusions: The results of this work provide systematic data on antibacterial efficacy of miramistin. They also underscore the need in relevant in vivo models for evaluation of antiseptics' efficacy. While the existing in vitro methods can be successfully applied at the discovery stages, it is necessary to use more realistic in vivo models at more advanced development stages. The observed selectivity reversal effect should be taken into account when carrying out the antiseptics’ efficacy testing and surface disinfection procedures.

© 2020 Background: Miramistin is a widely used antiseptic, disinfectant and preservative, and one of the most popular antimicrobial agents on pharmaceutical market of the Russian Federation (http://www.dsm.ru/en/news/385/). However, there is a lack of reported systematic data on antibacterial efficacy of this agent obtained in accordance with the international standards. Aim: This paper represents a systematic study of antibacterial properties of miramistin. Another objective of this work is to evaluate and compare the exploratory performance of in vitro and in vivo protocols of antiseptics’ efficacy testing using miramistin as the reference antiseptic. Methods: Antibacterial activity of 0.1% and 0.2% aqueous solutions of miramistin against two museum strains of S. aureus (ATCC 209p) and E. coli (CDC F-50) was studied. Three standard in vitro laboratory tests (microdilution test, suspension test, and metal surface test), and one in vivo test (on rat's skin) were used. The study was conducted in accordance with the international regulatory documents. Results: Miramistin showed high bactericidal activity against the studied bacterial pathogens in the standard in vitro tests. Thus, in the microdilution test it showed expressed activity against S. aureus (MIC 8 μg/ml, MBC 16 μg/ml) and E. coli (MIC 32 μg/ml, MBC 128 μg/ml). In the suspension test, miramistin decreased the amount of colony forming units by at least 6 log10 units for S. aureus, and by at least 4.5 log10 units for E. coli. Transition to the metal surface test led to significant decrease of antibacterial activity by 1–3 log10 units as compared to the suspension test. Further dramatic reduction of antiseptic activity (by 3–4 log10 units) was observed in in vivo rat skin test. Addition of a protein contaminant (bovine serum albumin) led to a general decrease in the effectiveness of miramistin against the test pathogens (typically, by 1–2 log10 units). An interesting effect of exposure time-dependent reversal of miramistin's specificity to the studied Gram-positive S. aureus and the Gram-negative E. coli organisms was observed in the metal surface test. Conclusions: The results of this work provide systematic data on antibacterial efficacy of miramistin. They also underscore the need in relevant in vivo models for evaluation of antiseptics' efficacy. While the existing in vitro methods can be successfully applied at the discovery stages, it is necessary to use more realistic in vivo models at more advanced development stages. The observed selectivity reversal effect should be taken into account when carrying out the antiseptics’ efficacy testing and surface disinfection procedures.

© 2020 Background: Miramistin is a widely used antiseptic, disinfectant and preservative, and one of the most popular antimicrobial agents on pharmaceutical market of the Russian Federation (http://www.dsm.ru/en/news/385/). However, there is a lack of reported systematic data on antibacterial efficacy of this agent obtained in accordance with the international standards. Aim: This paper represents a systematic study of antibacterial properties of miramistin. Another objective of this work is to evaluate and compare the exploratory performance of in vitro and in vivo protocols of antiseptics’ efficacy testing using miramistin as the reference antiseptic. Methods: Antibacterial activity of 0.1% and 0.2% aqueous solutions of miramistin against two museum strains of S. aureus (ATCC 209p) and E. coli (CDC F-50) was studied. Three standard in vitro laboratory tests (microdilution test, suspension test, and metal surface test), and one in vivo test (on rat's skin) were used. The study was conducted in accordance with the international regulatory documents. Results: Miramistin showed high bactericidal activity against the studied bacterial pathogens in the standard in vitro tests. Thus, in the microdilution test it showed expressed activity against S. aureus (MIC 8 μg/ml, MBC 16 μg/ml) and E. coli (MIC 32 μg/ml, MBC 128 μg/ml). In the suspension test, miramistin decreased the amount of colony forming units by at least 6 log10 units for S. aureus, and by at least 4.5 log10 units for E. coli. Transition to the metal surface test led to significant decrease of antibacterial activity by 1–3 log10 units as compared to the suspension test. Further dramatic reduction of antiseptic activity (by 3–4 log10 units) was observed in in vivo rat skin test. Addition of a protein contaminant (bovine serum albumin) led to a general decrease in the effectiveness of miramistin against the test pathogens (typically, by 1–2 log10 units). An interesting effect of exposure time-dependent reversal of miramistin's specificity to the studied Gram-positive S. aureus and the Gram-negative E. coli organisms was observed in the metal surface test. Conclusions: The results of this work provide systematic data on antibacterial efficacy of miramistin. They also underscore the need in relevant in vivo models for evaluation of antiseptics' efficacy. While the existing in vitro methods can be successfully applied at the discovery stages, it is necessary to use more realistic in vivo models at more advanced development stages. The observed selectivity reversal effect should be taken into account when carrying out the antiseptics’ efficacy testing and surface disinfection procedures.

© 2019 Elsevier GmbH Introduction: Eastern and North-Eastern regions of Kazakhstan are considered to be environmentally disadvantaged due to industrial pollution and activity of the former Semipalatinsk Nuclear Test Site. Ferrous metallurgy is represented by the world's largest ferroalloy plant located in Aksu. In addition to a ferroalloy plant, Aksu is the home for the largest thermal power plant in Kazakhstan. Objective: Biomonitoring of 31 hair and blood trace elements (Ag, Ba, Be, Bi, Cs, Co, Ce, Cr, Cu, Eu, Gd, Hf, In, La, Li, Mn, Mo, Nb, Nd, Pb, Sc, Sn, Tl, Th, U, V, W, Y, Yb, Zn, and Zr) in non-occupationally exposed population residing in polluted areas of East Kazakhstan and Pavlodar regions. Methods: Five case groups, residing in the vicinity to the former Semipalatinsk Nuclear Test Site (Akzhar, Borodulikha, and Karaul) or in proximity to industrial plants (Aksu and Ust-Kamenogorsk) have been assessed vs. controls from a rural settlement in Kurchum. In total, 204 hair and blood samples were analyzed by inductively coupled plasma mass spectrometry. Results: The observed blood concentrations of trace elements were in agreement with earlier studies on residents of industrially polluted areas. Elevated levels of blood Ba, Mn, Pb, V, and Zn were detected in residents of Aksu and Ust-Kamenogorsk. The elemental composition of head hair was characterized by greater stability between the study sites. Conclusion: Residency near the former Semipalatinsk Test Site could be considered as safe, while the environmental status of industrial settlements appears to be rather adverse.

© 2017, Springer Science+Business Media, LLC, part of Springer Nature. The primary objective of the present study was to assess the level of selenium and toxic trace elements in wheat, rice, maize, and mustard from seleniferous areas of Punjab, India. The content of selenium (Se) and toxic trace elements, including aluminum (Al), arsenic (As), cadmium (Cd), mercury (Hg), nickel (Ni), lead (Pb), and tin (Sn), in crop samples was assessed using inductively coupled plasma mass-spectrometry after microwave digestion of the samples. The obtained data demonstrate that cultivation of crops on seleniferous soils significantly increased Se level in wheat, mustard, rice, and maize by a factor of more than 590, 111, 85, and 64, respectively. The study also showed that Se exposure affected toxic metal content in crops. In particular, Se-rich wheat was characterized by a significant decrease in Al, As, Ni, Pb, and Sn levels. The level of As, Cd, Ni, Pb, and Sn was significantly decreased in Se-rich rice, whereas As content was increased. In turn, the decrease in Al, As, Cd, Ni, Pb, and Sn levels in Se-rich maize was associated with a significant elevation of Hg content. Finally, Se-rich mustard was characterized by a significant increase in Al, As, and Hg levels, while the content of Ni, Pb, and Sn was significantly lower than the control levels. These findings should be taken into account while developing the nutritional strategies for correction of Se status. At the same time, the exact mechanisms underlying the observed differences are to be estimated.

© 2018, Springer Science+Business Media, LLC, part of Springer Nature. The levels of pollution by heavy metals and arsenic in top soil layers and medicinal plant raw materials in Voronezh Region were studied using Urtica dioica and Plantago major leaves as examples. The analyses were carried out using atomic absorption spectrometry on a graphite-furnace MGA-915MD spectrometer. Samples were collected from districts with different anthropogenic impacts across the whole region. Leaves of P. major characteristically had the highest coefficients of accumulation from the soil for Cd, As, and Ni. Leaves of U. dioica typically had high accumulation coefficients for Ni.