Репозиторий Университета

© 2020 Elsevier B.V. For thermoelements operating on the Peltier and Seebeck effects, including multisection ones used at temperatures up to 900 K, the physicochemical principles of creating effective thin-film multilayer contact systems obtained by magnetron ion-plasma sputtering have been developed. The formation of contact systems was carried out on thermoelectric materials based on: Bi2Te3; Sb2Te3; PbTe; GeTe with the increased thermoelectric figure of merit. A structure of contact systems consisting of contact layers providing ohmic contact, adhesion, barrier and interconnection properties of contact systems is proposed and justified. The selection criteria for materials of contact layers are substantiated. For multisection thermoelements operating on the Seebeck effect at temperatures above 500 K, the necessity of introducing diffusion-barrier layers into the structure of contact systems providing reliability and invariability of the properties of contact systems is substantiated. Based on the physicochemical analysis, the thermodynamic and kinetic factors of the stability and degradation of diffusion-barrier layers are determined. The influence of methods for preparing the surface of thermoelectric materials on the adhesion, contact resistance, and thermal stability of contact systems is established. Using Auger electron spectroscopy, the analysis of the causes of thermal stability and degradation of contact systems was carried out. The deposition modes were determined. The effective contact systems were obtained and investigated. The respective systems are based on: Ni; Mo/Ni and Ni/(Ta–W–N)/Ni having the adhesive strength of more than 12 MPa; the contact resistance not exceeding 10−9 Ω m2 and thermal stability at temperatures up to 900 K.

© 2020 Elsevier B.V. For thermoelements operating on the Peltier and Seebeck effects, including multisection ones used at temperatures up to 900 K, the physicochemical principles of creating effective thin-film multilayer contact systems obtained by magnetron ion-plasma sputtering have been developed. The formation of contact systems was carried out on thermoelectric materials based on: Bi2Te3; Sb2Te3; PbTe; GeTe with the increased thermoelectric figure of merit. A structure of contact systems consisting of contact layers providing ohmic contact, adhesion, barrier and interconnection properties of contact systems is proposed and justified. The selection criteria for materials of contact layers are substantiated. For multisection thermoelements operating on the Seebeck effect at temperatures above 500 K, the necessity of introducing diffusion-barrier layers into the structure of contact systems providing reliability and invariability of the properties of contact systems is substantiated. Based on the physicochemical analysis, the thermodynamic and kinetic factors of the stability and degradation of diffusion-barrier layers are determined. The influence of methods for preparing the surface of thermoelectric materials on the adhesion, contact resistance, and thermal stability of contact systems is established. Using Auger electron spectroscopy, the analysis of the causes of thermal stability and degradation of contact systems was carried out. The deposition modes were determined. The effective contact systems were obtained and investigated. The respective systems are based on: Ni; Mo/Ni and Ni/(Ta–W–N)/Ni having the adhesive strength of more than 12 MPa; the contact resistance not exceeding 10−9 Ω m2 and thermal stability at temperatures up to 900 K.

© 2020 The Author(s). Published by IOP Publishing Ltd Printed in the UK Graphene-based nano-porous materials (GNM) are potentially useful for all those applications needing a large specific surface area (SSA), typical of the bidimensional graphene, yet realized in the bulk dimensionality. Such applications include for instance gas storage and sorting, catalysis and electrochemical energy storage. While a reasonable control of the structure is achieved in micro-porous materials by using nano-micro particles as templates, the controlled production or even characterization of GNMs with porosity strictly at the nano-scale still raises issues. These are usually produced using dispersion of nano-flakes as precursors resulting in little control on the final structure, which in turn reflects in problems in the structural model building for computer simulations. In this work, we describe a strategy to build models for these materials with predetermined structural properties (SSA, density, porosity), which exploits molecular dynamics simulations, Monte Carlo methods and machine learning algorithms. Our strategy is inspired by the real synthesis process: starting from randomly distributed flakes, we include defects, perforation, structure deformation and edge saturation on the fly, and, after structural refinement, we obtain realistic models, with given structural features. We find relationships between the structural characteristics and size distributions of the starting flake suspension and the final structure, which can give indications for more efficient synthesis routes. We subsequently give a full characterization of the models versus H2 adsorption, from which we extract quantitative relationship between the structural parameters and the gravimetric density. Our results quantitatively clarify the role of surfaces and edges relative amount in determining the H2 adsorption, and suggest strategies to overcome the inherent physical limitations of these materials as adsorbers. We implemented the model building and analysis procedures in software tools, freely available upon request.

© 2020 The Authors Background: Since the first report by Perry et al. (1955), most studies affirmed the hypertensive effects of cadmium (Cd) in humans. Nonetheless, conclusions between studies remain inconsistent. Objective: The aim of this study was to reevaluate the evidence for a potential relationship between Cd exposure and altered blood pressure and/or hypertension, focusing on studies published between January 2010 and March 2020. Methods: We reviewed all observational studies from database searches (PubMed and SCOPUS) on Cd exposure and blood pressure or hypertension. We extracted information from studies that provided sufficient data on population characteristics, smoking status, exposure, outcomes, and design. Results: Thirty-eight studies met our inclusion criteria; of those, twenty-nine were cross sectional, three case control, five cohort and one interventional study. Blood or urinary Cd levels were the most commonly used biomarkers. Conclusions: A positive association between blood Cd levels and blood pressure and/or hypertension was identified in numerous studies at different settings. Limited number of representative population-based studies of never-smokers was observed, which may have confounded our conclusions. The association between urinary Cd and blood pressure and/or hypertension remains uncertain due to conflicting results, including inverse relationships with lack of strong mechanistic support. We point to the urgent need for additional longitudinal studies to confirm our findings.

© 2020 The Authors Background: Since the first report by Perry et al. (1955), most studies affirmed the hypertensive effects of cadmium (Cd) in humans. Nonetheless, conclusions between studies remain inconsistent. Objective: The aim of this study was to reevaluate the evidence for a potential relationship between Cd exposure and altered blood pressure and/or hypertension, focusing on studies published between January 2010 and March 2020. Methods: We reviewed all observational studies from database searches (PubMed and SCOPUS) on Cd exposure and blood pressure or hypertension. We extracted information from studies that provided sufficient data on population characteristics, smoking status, exposure, outcomes, and design. Results: Thirty-eight studies met our inclusion criteria; of those, twenty-nine were cross sectional, three case control, five cohort and one interventional study. Blood or urinary Cd levels were the most commonly used biomarkers. Conclusions: A positive association between blood Cd levels and blood pressure and/or hypertension was identified in numerous studies at different settings. Limited number of representative population-based studies of never-smokers was observed, which may have confounded our conclusions. The association between urinary Cd and blood pressure and/or hypertension remains uncertain due to conflicting results, including inverse relationships with lack of strong mechanistic support. We point to the urgent need for additional longitudinal studies to confirm our findings.

© 2020 Elsevier Inc. Arecoline is a naturally occurring psychoactive alkaloid with partial agonism at nicotinic and muscarinic acetylcholine receptors. Arecoline consumption is widespread, making it the fourth (after alcohol, nicotine and caffeine) most used substance by humans. However, the mechanisms of acute and chronic action of arecoline in-vivo remain poorly understood. Animal models are a valuable tool for CNS disease modeling and drug screening. Complementing rodent studies, the zebrafish (Danio rerio) emerges as a promising novel model organism for neuroscience research. Here, we assessed the effects of acute and chronic arecoline on adult zebrafish behavior and physiology. Overall, acute and chronic arecoline treatments produced overt anxiolytic-like behavior (without affecting general locomotor activity and whole-body cortisol levels), with similar effects also caused by areca nut water extracts. Acute arecoline at 10 mg/L disrupted shoaling, increased social preference, elevated brain norepinephrine and serotonin levels and reduced serotonin turnover. Acute arecoline also upregulated early protooncogenes c-fos and c-jun in the brain, whereas chronic treatment with 1 mg/L elevated brain expression of microglia-specific biomarker genes egr2 and ym1 (thus, implicating microglial mechanisms in potential effects of long-term arecoline use). Finally, acute 2-h discontinuation of chronic arecoline treatment evoked withdrawal-like anxiogenic behavior in zebrafish. In general, these findings support high sensitivity of zebrafish screens to arecoline and related compounds, and reinforce the growing utility of zebrafish for probing molecular mechanisms of CNS drugs. Our study also suggests that novel anxiolytic drugs can eventually be developed based on arecoline-like molecules, whose integrative mechanisms of CNS action may involve monoaminergic and neuro-immune modulation.

© 2020 Elsevier B.V. Nerve Growth Factor (NGF) and Brain Derived Neurotrophic Factor (BDNF) are crucial for the peripheral and central nervous system development, respectively, and differential brain and blood levels in Intra Uterine Growth Restriction (IUGR) and prematurity have been found. As reduced growth of brain regions, measured at 30−40 days of postnatal period, has been demonstrated in preterm and IUGR neonates who showed impaired neuro-development at two years of age, in this study, the levels of NGF and BDNF were evaluated in the urine samples of 30−40 day-old subjects who were full-term, preterm and IUGR and showed a normal or an abnormal neuro-development at follow up after two years. Neurotrophins were measured concurrently with volumes of whole brain, thalamus, frontal cortex and cerebellum. Values were then correlated with later neuro-developmental outcome. Biochemical parameters and cerebral volumes were assessed using colorimetric ELISA kits and three-dimensional ultra-sonography (3DUS), respectively. Neuro-development was estimated using the Griffiths-II test. Urinary NGF and brain volumes significantly correlated and were lower in preterm and IUGR subjects characterized by poor neuro-development. No differences were seen in the case of BDNF. The present investigation demonstrates, for the first time, the strong and direct association of NGF with brain growth at the initial phase of the postnatal period and with neuro-developmental outcome in later life. Remarkably, urinary NGF may be suggested as an early prognostic indicator of high long-term risk of motor and cognitive impairment in IUGR and preterm neonates.

© 2020 Elsevier B.V. Nerve Growth Factor (NGF) and Brain Derived Neurotrophic Factor (BDNF) are crucial for the peripheral and central nervous system development, respectively, and differential brain and blood levels in Intra Uterine Growth Restriction (IUGR) and prematurity have been found. As reduced growth of brain regions, measured at 30−40 days of postnatal period, has been demonstrated in preterm and IUGR neonates who showed impaired neuro-development at two years of age, in this study, the levels of NGF and BDNF were evaluated in the urine samples of 30−40 day-old subjects who were full-term, preterm and IUGR and showed a normal or an abnormal neuro-development at follow up after two years. Neurotrophins were measured concurrently with volumes of whole brain, thalamus, frontal cortex and cerebellum. Values were then correlated with later neuro-developmental outcome. Biochemical parameters and cerebral volumes were assessed using colorimetric ELISA kits and three-dimensional ultra-sonography (3DUS), respectively. Neuro-development was estimated using the Griffiths-II test. Urinary NGF and brain volumes significantly correlated and were lower in preterm and IUGR subjects characterized by poor neuro-development. No differences were seen in the case of BDNF. The present investigation demonstrates, for the first time, the strong and direct association of NGF with brain growth at the initial phase of the postnatal period and with neuro-developmental outcome in later life. Remarkably, urinary NGF may be suggested as an early prognostic indicator of high long-term risk of motor and cognitive impairment in IUGR and preterm neonates.

© 2020 Microcapsules are ideal cargo platform for variety of applications such as drug delivery, sensing and imaging due to the combination of a simplicity fabrication and flexibility in the design. We developed remotely collapsing polymer capsules to response to external microwave treatment. The multilayer structure of the capsules was designed to create a polyfunctional system intercalating with nanodiamonds (NDs) and upconversion nanoparticles (UCNPs) into the polyelectrolyte shell. NDs empower local overheating to the microcapsules, while UCNPs provide opportunity to luminescent thermal sensing. UCNPs consist of inorganic crystalline host matrix - hexagonal β-phase NaYF4, doped with pairs of trivalent lanthanide ions, which play role of sensitizer (Yb3+) and activator (Er3+). The microwave triggering followed by the capsule heating results in the controlled destruction of the polyelectrolyte shell with subsequent cargo release. UCNPs luminescence was utilized to determine the local temperature of the capsule shell at nanoscale under GHz ultrasonic treatment. Our novel approach provides on demand microcapsule system destruction, which can be used in the development of nanotheranostic platform for the unification of diagnosis and treatment of various diseases.

© 2020 Elsevier Ltd Research on individual differences in the fields of chronobiology and chronopsychology mostly focuses on two – morning and evening – chronotypes. However, recent developments in these fields pointed at a possibility to extend chronotypology beyond just two chronotypes. We examined this possibility by implementing the Single-Item Chronotyping (SIC) as a method for self-identification of chronotype among six simple chart options illustrating the daily change in alertness level. Of 2283 survey participants, 2176 (95%) chose one of these options. Only 13% vs. 24% chose morning vs. evening type (a fall vs. a rise of alertness from morning to evening), while the majority of participants chose four other types (with a peak vs. a dip of alertness in the afternoon and with permanently high vs. low alertness levels throughout the day, 15% vs. 18% and 9% vs. 16%, respectively). The same 6 patterns of diurnal variation in sleepiness were yielded by principal component analysis of sleepiness curves. Six chronotypes were also validated against the assessments of sleep timing, excessive daytime sleepiness, and abilities to wake or sleep on demand at different times of the day. We concluded that the study results supported the feasibility of classification with the 6 options provided by the SIC.

Production of reactive oxygen species (ROS) in the mitochondria plays multiple roles in physiology, and excessive production of ROS leads to the development of various pathologies. ROS in the mitochondria are generated by various enzymes, mainly in the electron transporvt chain, and it is important to identify not only the trigger but also the source of free radical production. It is important to measure mitochondrial ROS in live, intact cells, because activation of ROS production could be initiated by changes in extramitochondrial processes which could be overseen when using isolated mitochondria. Here we describe the approaches, which allow to measure production of ROS in the matrix of mitochondria in live cells. We also demonstrate how to measure kinetic changes in lipid peroxidation in mitochondria of live cells. These methods could be used for understanding the mechanisms of pathology in a variety of disease models and also for testing neuro- or cardioprotective chemicals.

Production of reactive oxygen species (ROS) in the mitochondria plays multiple roles in physiology, and excessive production of ROS leads to the development of various pathologies. ROS in the mitochondria are generated by various enzymes, mainly in the electron transporvt chain, and it is important to identify not only the trigger but also the source of free radical production. It is important to measure mitochondrial ROS in live, intact cells, because activation of ROS production could be initiated by changes in extramitochondrial processes which could be overseen when using isolated mitochondria. Here we describe the approaches, which allow to measure production of ROS in the matrix of mitochondria in live cells. We also demonstrate how to measure kinetic changes in lipid peroxidation in mitochondria of live cells. These methods could be used for understanding the mechanisms of pathology in a variety of disease models and also for testing neuro- or cardioprotective chemicals.

© 2020 Elsevier B.V. Over the last two decades, the scientific community and industry have made huge efforts to develop environmental protection technologies. In particular, the scarcity of drinking water has prompted the investigation of several physico-chemical treatments, and synergistic effects have been observed in hyphenated techniques. Herein, we report the first example of water treatment under simultaneous hydrodynamic cavitation and plasma discharge with the intense generation of radicals, UV light, shock waves and charged particles. This highly reactive environment is well suited to the bulk treatment of polluted water (i.e. E. coli disinfection and organic pollutant degradation). We have developed a new prototype and have efficiently applied this hybrid technology to water disinfection and the complete degradation of methanol in water with the aim of demonstrating its scalability. We have analyzed the mechanisms of water disinfection under the abovementioned conditions and verified them by measuring cavitation noise spectra and plasma emission spectra. We have also used the degradation of textile dyes and methanol solutions as an indicator for the formation of radicals.

© 2020 Elsevier B.V. Over the last two decades, the scientific community and industry have made huge efforts to develop environmental protection technologies. In particular, the scarcity of drinking water has prompted the investigation of several physico-chemical treatments, and synergistic effects have been observed in hyphenated techniques. Herein, we report the first example of water treatment under simultaneous hydrodynamic cavitation and plasma discharge with the intense generation of radicals, UV light, shock waves and charged particles. This highly reactive environment is well suited to the bulk treatment of polluted water (i.e. E. coli disinfection and organic pollutant degradation). We have developed a new prototype and have efficiently applied this hybrid technology to water disinfection and the complete degradation of methanol in water with the aim of demonstrating its scalability. We have analyzed the mechanisms of water disinfection under the abovementioned conditions and verified them by measuring cavitation noise spectra and plasma emission spectra. We have also used the degradation of textile dyes and methanol solutions as an indicator for the formation of radicals.

© 2020 Elsevier B.V. Over the last two decades, the scientific community and industry have made huge efforts to develop environmental protection technologies. In particular, the scarcity of drinking water has prompted the investigation of several physico-chemical treatments, and synergistic effects have been observed in hyphenated techniques. Herein, we report the first example of water treatment under simultaneous hydrodynamic cavitation and plasma discharge with the intense generation of radicals, UV light, shock waves and charged particles. This highly reactive environment is well suited to the bulk treatment of polluted water (i.e. E. coli disinfection and organic pollutant degradation). We have developed a new prototype and have efficiently applied this hybrid technology to water disinfection and the complete degradation of methanol in water with the aim of demonstrating its scalability. We have analyzed the mechanisms of water disinfection under the abovementioned conditions and verified them by measuring cavitation noise spectra and plasma emission spectra. We have also used the degradation of textile dyes and methanol solutions as an indicator for the formation of radicals.

© 2020 Elsevier B.V. Large-scale cell culture processes are required to produce biopharmaceuticals, cells for tissue engineering, and vaccine production while being effective in toxicity testing, gene therapy vector production for cancer research, and drug development. A growing trend in these industries, particularly for suspension cells, involves implementation of continuous cell perfusion processes, which require an aseptic, efficient, cost-effective, and reliable cell separation and retention scheme. Many cell separation techniques (membrane-based systems, lateral displacement devices, and acoustophoresis) have proven to be highly efficient, but suffer from issue of clogging and high cost, limiting their reliability, and thus, their overall feasibility. Some cell retention devices—those based on inertial microfluidics—offer high reliability (i.e., clog-free), but their efficiency reduces at higher cell concentrations. To overcome this apparent trade-off, we report the development of an integrated system consisting of two different membrane-less microfiltration techniques for cell separation from spent cell media. Although it could be adapted to numerous cell culture applications, this system was optimized and tested for suspension-adapted Chinese Hamster Ovary (CHO) cells. As the first step of the cell retention system, a miniaturised hydrocyclone was developed that could separate the cells with macroscopic volume processing rates (~200 mL/min). At this stage, up to 75% of the cells were isolated with minimal (<5%) change in the viability. The remaining cells passed through the overflow of the device and entered to a multiplexed spiral microchannel system, where more than 90% of the remaining cells were recovered, yielding an overall efficiency of up to 95%. The proposed integrated system is thus ideal for continuous and high throughput cell retention even at high cell concentrations (~80 million cells/mL), which is in range of current need in the bioprocessing industry.

© 2020 Elsevier B.V. Large-scale cell culture processes are required to produce biopharmaceuticals, cells for tissue engineering, and vaccine production while being effective in toxicity testing, gene therapy vector production for cancer research, and drug development. A growing trend in these industries, particularly for suspension cells, involves implementation of continuous cell perfusion processes, which require an aseptic, efficient, cost-effective, and reliable cell separation and retention scheme. Many cell separation techniques (membrane-based systems, lateral displacement devices, and acoustophoresis) have proven to be highly efficient, but suffer from issue of clogging and high cost, limiting their reliability, and thus, their overall feasibility. Some cell retention devices—those based on inertial microfluidics—offer high reliability (i.e., clog-free), but their efficiency reduces at higher cell concentrations. To overcome this apparent trade-off, we report the development of an integrated system consisting of two different membrane-less microfiltration techniques for cell separation from spent cell media. Although it could be adapted to numerous cell culture applications, this system was optimized and tested for suspension-adapted Chinese Hamster Ovary (CHO) cells. As the first step of the cell retention system, a miniaturised hydrocyclone was developed that could separate the cells with macroscopic volume processing rates (~200 mL/min). At this stage, up to 75% of the cells were isolated with minimal (<5%) change in the viability. The remaining cells passed through the overflow of the device and entered to a multiplexed spiral microchannel system, where more than 90% of the remaining cells were recovered, yielding an overall efficiency of up to 95%. The proposed integrated system is thus ideal for continuous and high throughput cell retention even at high cell concentrations (~80 million cells/mL), which is in range of current need in the bioprocessing industry.

© 2020 Elsevier B.V. Magnetic anisotropy and interface exchange interaction were analyzed in α-Fe core microwire covered with PrDyCoFeB amorphous shell. The α-Fe/PrDyCoFeB core/shell microwires were grown by pendant drop melt extraction technique providing separation of the α-Fe and PrDyCoFeB phases during the ultrafast cooling. Low saturation field of the core ~100 Oe and high saturation field of amorphous shell ~10 kOe with zero coercivity were distinguished from angular dependences of the magnetic moment, recorded in low and high magnetic fields. Sharp decrease of the longitudinal magnetization, effective anisotropy field and magnetic susceptibility have been observed below the critical temperature, Tcrit = 240 K, in zero field. The Almeida-Thouless transition from ferrimagnetic state to Ising spin glass state has been revealed in PrDyCoFeB amorphous shell. Such spin reorientation transition is very attractive for magnetocaloric applications. We found exchange bias effect controlled by exchange coupling between ferromagnetic core and ferrimagnetic shell. The significance of the obtained data lies in possible applications of the core/shell microwires for tweezers with magnetic moment, stepwise changing in external field. Exchange bias in core-shell interface provides determined initial state of the microwire used as working media of field sensor. The sharp decrease of the magnetization associating with spin-reorientation transition looks very promising for magnetocaloric applications close to room temperature.

© 2020 Elsevier B.V. Magnetic anisotropy and interface exchange interaction were analyzed in α-Fe core microwire covered with PrDyCoFeB amorphous shell. The α-Fe/PrDyCoFeB core/shell microwires were grown by pendant drop melt extraction technique providing separation of the α-Fe and PrDyCoFeB phases during the ultrafast cooling. Low saturation field of the core ~100 Oe and high saturation field of amorphous shell ~10 kOe with zero coercivity were distinguished from angular dependences of the magnetic moment, recorded in low and high magnetic fields. Sharp decrease of the longitudinal magnetization, effective anisotropy field and magnetic susceptibility have been observed below the critical temperature, Tcrit = 240 K, in zero field. The Almeida-Thouless transition from ferrimagnetic state to Ising spin glass state has been revealed in PrDyCoFeB amorphous shell. Such spin reorientation transition is very attractive for magnetocaloric applications. We found exchange bias effect controlled by exchange coupling between ferromagnetic core and ferrimagnetic shell. The significance of the obtained data lies in possible applications of the core/shell microwires for tweezers with magnetic moment, stepwise changing in external field. Exchange bias in core-shell interface provides determined initial state of the microwire used as working media of field sensor. The sharp decrease of the magnetization associating with spin-reorientation transition looks very promising for magnetocaloric applications close to room temperature.

© 2020 Bone age is used widely by pediatricians to assess the skeletal maturity of a child and predict growth potential. This entails measuring the size of secondary ossification centers (SOCs), which develop with age in the ends of long bones, which are initially cartilaginous. However, little is presently known about the developmental biology, evolution and functional role of these skeletal elements. Here, we summarize the knowledge currently available in this area and discuss potential primary functions of the SOC.